Charakteristic:
Axial-flow fans suitable for direct ventilation through a wall or for short air conductors, with a low loss of pressure. They are fully interchangeable with the former type series VHV-INO.
Variations:
-ECT 140 (702008) basic, no attached switch (switch built into the wall)
-ECT 140 S (701001) with pull cord
-ECT 140 E with timer switch, adjustable for up to 60 min. (timer switch DIP)
Flow diagram of ventilator fan Elko Clima
"Trilobit"
Elko Clima "Trilobit"
Use:
for installation in a normal enviroment
(ČSN 332000-3)
-WC and bathrooms
-kitchens and larder
-large rooms (e.g. salesrooms, sports halls, dance halls, waiting rooms, industrial objects, etc.)
Hygiene:
restricted areas of use according to directive MZ CR 13/1997 "Health protection and the unfavourable effect of noise
and vibration".
Approval and certification: ELECTRONIC TESTING INSTITUTE in Praque.
Technical specification:
Material, composition, design:
All-plastic finish in ABS Forsan and Taboren
Motor-assynchronous with short circuit armature and pole shading
- anti-overload capacity (overheating) is protected by a two-way thermal fuse
- slide bearing
Terminal block:
accessible after dismantling outer plastic protective grate
Accessories, attachments
Suction grid
Exterior cover with ventilation flap
Metal shrunk ring
Technical data:
| Value | Rated |
| voltage | 230 V |
| max current | 0,15 A |
| rated frequency | 50 Hz |
| input | 25W |
| rated speed | 2 800/min- |
| level of acoustical compresion LAeq | 48,5 dB (A) |
| level of acoustical output LWA | max. 57 dB |
| axial flow fans coverage | IP 44 |
| piping diameter | 140 mm |
| max environment temperature | 40oC |
| mass of basic type (inclusive shrink ring) | 1,7 kg |
| flow | viz obrázek |
Use in buildings
Preparations: 230 V electric current lead under lime plaster, or cable along lime plaster
Building-in: Installation possible in both vertical and horizontal position in walls, partitions and ceiling
Connection:
to ventilating air-pipe
air hose
open-air outlet
Control:
wall switch, pull cord
Operation and maintenance: 20 000 operating hours, ensure the free movement of the over-pressure flap valve - control
approx. once a year
